Waterproofing Services
Complete Waterproofing Solutions
All Types of Professional Waterproofing Work
1. Brick Bed Waterproofing Work
Brick bed waterproofing is a traditional roofing technique that uses broken brick pieces (brick bats) and cement mortar to prevent water leaks and insulate flat concrete surfaces.
- Stops Leaks: The dense layer blocks rainwater from reaching the main concrete roof slab below.
- Blocks Heat: As noted by Asian Paints, "this method not only provides a robust waterproof layer but also enhances thermal insulation, which is crucial in regions with extreme temperatures."
- Long Lifespan: Materials like brick, tile, and cement mortar last for many years with very low maintenance.
2. Grit Waterproofing Work
Grit Concrete Screed: A high-density mix containing cement, sand, and coarse aggregate (such as M-20 grit concrete) combined with specialized liquid waterproofing compounds.
- 2-Inch Terracing Layer: Laid typically in a 2-inch uniform layer on open roof terraces.
- Sloped Water Runoff: Engineered with a precise slope to facilitate quick water runoff and prevent water pooling on roofs.
- Heavy Duty Surface: Highly resistant to foot traffic and environmental erosion.
3. China Mosaic Waterproofing Work
China Mosaic waterproofing is a traditional construction technique that uses small, broken pieces of glazed ceramic tiles (china chips) embedded in a thick cement mortar base to waterproof and cool flat roofs and terraces.
- Moisture Barrier: A solid layer of cement mortar mixed with waterproofing chemical compounds prevents rainwater from reaching the structural roof slab.
- Heat Reflection: The shiny, white or light-colored ceramic chips reflect solar radiation, acting as an effective cool-roof system to reduce indoor room temperatures.
4. Kota Waterproofing
Kota waterproofing, also known as box-type waterproofing, is a proven technique using highly durable natural limestone slabs set in specialized polymer-modified cement mortar to block water seepage in roofs, terraces, and subterranean basements.
- Solid Barrier: Kota stone slabs combined with waterproofing slurry form an impervious physical barrier against standing water pressure.
- Versatile Application: Highly recommended for basements, elevator pits, water retention tanks, and flat open roofs.
5. PU Injection Grouting
PU (Polyurethane) injection grouting is a specialized repair method that pumps liquid expanding resin into cracks, joints, and voids in concrete to instantly stop active water leaks and seal heavy structures.
- 1. Drilling: Technicians drill precise packer holes along or directly into leaking concrete cracks.
- 2. High-Pressure Injection: High-pressure pumps push liquid polyurethane resin deep into hidden voids.
- 3. 20x Expansion: Liquid reacts with internal moisture, expanding up to 20 times its volume to form an airtight, watertight flexible foam plug.
6. Cement Injection Grouting
Cement injection grouting involves pumping a non-shrink, high-adhesion cementitious slurry combined with plasticizers under controlled pressure into honeycombed concrete and deep structural joints.
- Structural Strengthening: Fills internal honeycomb cavities and consolidates weak concrete.
- Seepage Prevention: Prevents ground water infiltration in retaining walls, bridge piers, basements, and dams.
7. Dampproof Coating Waterproofing
Coating waterproofing is the application of a specialized elastomeric liquid polymer material that cures to form a continuous, joint-free protective membrane preventing water dampness from seeping into building walls and slabs.
- Liquid Application: Easily applied via roller, brush, or airless spray over concrete, masonry, wood, and metal substrates.
- Seamless Elastic Barrier: Forms a flexible 100% waterproof membrane that stretches with temperature fluctuations to bridge fine hairline cracks without tearing.
8. PU Coating Waterproofing
High-performance Polyurethane (PU) liquid membrane waterproofing creates a tough, flexible, and UV-resistant seamless shield on exposed concrete roofs, balconies, and wet areas.
- High Crack Bridging: Superior elasticity allows the coating to accommodate structural movements and temperature expansion.
- Weather & UV Resistant: Long lasting protection against standing rain water and harsh UV rays.
9. APP Bitumen Sheet Waterproofing
Bituminous waterproofing uses bitumen—a highly viscous, naturally hydrophobic petroleum product—to create a heavy-duty water-repellent membrane on building foundations and flat roofs.
- Bituminous Membranes: Pre-manufactured polymer-modified (APP/SBS) membrane sheets torched or cold-adhered down to form an impermeable waterproof layer.
- Hot & Cold Applied Coatings: Solid melted bitumen spread across surfaces or ready-to-use liquid bitumen paint applications for heavy protection.
All Work Includes 5 to 10 Years Written Formal Warranty
Guaranteed quality workmanship and post-installation inspection across Gujarat.